Ambient/Storage Temperature | 0…50 ºC / -25…60 ºC |
Relative Humidity | 80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C |
Protection Degree | According to EN 60529 IP20 |
Height | Max. 2000m |
Supply | 90-250V AC, 50/60Hz, 600VA |
Digital Input | Load output stopping method can be selected from program (NO/NC contact or NO/NC sensor) Internal 12V DC output or an external 10-30V DC supply can be used |
Insulation Voltage | 2500 Vrms 1 minute between input and output terminals |
External Connections | Plug-in terminals |
Load Current, AC51/25°C (Arms) | 4A AC |
Load Voltage (Vrms) | 0-125V AC |
Overload Current t=1s/25°C (Arms) | 150 |
Nonrecurrent Surge Current/25°C (Arms) | 400 |
Voltage Drop in Transmission (Vrms) | 1,6 |
Leakage Current (mArms) | 5 |
I²t Value for Fuse t=10ms (A²s) | 880 |
Frequency (Hz) (Hz) | 50-60 |
Power Factor (CosØ) | >0,75 |
Minimum Operating Current (mArms) | 160 |
Control Type | Phase angle controlled by using adjustment knob or 0-10V DC analog input signal |
Mounting Method | Wall mounting |
Dimensions | W80xH160xD55 mm |
Weight | Approx. 350g (After packing) |
Enclosure Material | Self extinguishing plastics |
Enda, Solid State Relay, Solid State Relay
EPAC-W-230
- Control with phase angle technology
- 4A AC load current
- 0-125V AC load voltage
- Phase angle can be controlled by adjustment knob or 0-10V DC analog signal
- Load output can be stopped with digital input
- Selectable digital input (for NO/NC contact or NO/NC sensor)
- Power cable with plug and motor connection cable included
- Connection cable for digital input (order option)
- Maximum and minimum value can be assigned to output
- Internal fuse
- 4 Digits LED indicator
- Control by phase angle
- Soft Start feature
- Varistor protection for voltage peaks
- On/Off Power switch
- CE marked according to European Norms
There are no reviews yet.