Ebmpapst
Showing 1–48 of 256 results
-
-
Blower, Blower Fan, Centrifugal Fan, Centrifugal Fans, Ebmpapst
R4D560-RB03-01
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system)
<= 3.5 mA
Motor protection Thermal overload protector (TOP)
brought out
Cable exit Lateral
Protection class I (if protective earth is connected by
customer)
Product conforming
to standard
EN 60034-1 (2010); EN 61800-5-1
Approval EAC; VDESKU: R4D560-RB03-01 -
-
AC Fan, AC Fan, Ebmpapst
W4E450-CU03-01
Moisture (F) /
Environmental (H)
protection class
H2
Ambient temperature
note
Occasional start-up at temperatures
between -40°C and -25°C is permitted.
For continuous operation at ambient
temperatures below -25°C (such as
refrigeration applications), use must be
made of a fan design with special lowtemperature bearings.
Installation position Shaft horizontal or rotor on bottom; rotor
on top on request
Condensation
drainage holes
On rotor side
Mode S1
Motor bearing Ball bearing
Touch current
according to IEC
60990 (measuring
circuit Fig. 4, TN
system)
<= 3.5 mASKU: W4E450-CU03-01 -
AC Fan, AC Fan, Ebmpapst
W4E300-CS72-30
Mounting position Any
Condensate discharge holes None
Operation mode S1
Motor bearing Ball bearing
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
< 0.75 mA
Motor protection Thermal overload protector (TOP) wired internally
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 60335-1; CE
Approval CCC; EACSKU: W4E300-CS72-30 -
AC Fan, AC Fan, Ebmpapst
W6D910-GA01-01
Degree of protection IP44
Insulation class “B”
Moisture (F) /
Environmental (H)
protection class
H1+
Installation position Shaft horizontal or rotor on bottom; rotor
on top on request
Condensation
drainage holes
On rotor side
Mode S1
Motor bearing Ball bearing
Touch current
according to IEC
60990 (measuring
circuit Fig. 4, TN
system)
< 0.75 mASKU: W6D910-GA01-01 -
AC Fan, AC Fan, Ebmpapst
W6D800-GD01-01
Installation position Any
Condensation
drainage holes
On rotor and stator sides
Mode S1
Motor bearing Ball bearing
Touch current
according to IEC
60990 (measuring
circuit Fig. 4, TN
system)
<= 3.5 mA
Electrical hookup Terminal box
Motor protection Thermal overload protector (TOP) with
basic insulation
with cable Axial
Protection class I (with customer connection of protective
earth)
Conformity with
standards
EN 60034-1 (2010); CE
Approval EAC; VDESKU: W6D800-GD01-01 -
AC Fan, AC Fan, Ebmpapst
W4D630-GD01-01
Operation mode S1
Motor bearing Ball bearing
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system)
<= 3.5 mA
Electrical leads Via terminal box
Motor protection Thermal overload protector (TOP)
brought out
Cable exit Axial
Protection class I (if protective earth is connected by
customer)SKU: W4D630-GD01-01 -
AC Fan, AC Fan, Ebmpapst
S6E630-AN01-01
Mass 13.9 kg
Size 630 mm
Motor size 110
Surface of rotor Coated in black
Material of terminal box PP plastic
Material of blades Press-fitted sheet steel blank, sprayed
with PP plastic
Material of guard grille Steel, coated in black plastic (RAL9005)
Number of blades 5
Direction of air flow V
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP54
Insulation class “F”
Humidity (F) /
environmental
protection class (H)
H2
Mounting position Shaft horizontal or rotor on bottom; rotor
on top on request
Condensation
drainage holes
Rotor-side
Operation mode S1
Motor bearing Ball bearingSKU: S6E630-AN01-01 -
AC Fan, AC Fan, Ebmpapst
S4E560-AQ01-01
Moisture (F) / Environmental (H) protection class H2 Max. permitted ambient temp. for motor (transport/storage) +80 °C Min. permitted ambient temp. for motor (transport/storage) -40 °C Installation position Shaft horizontal or rotor on bottom; rotor on top on request Condensation drainage holes On rotor side Mode S1 Motor bearing Ball bearing Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA Electrical hookup Terminal box / Capacitor integrated and connected Motor protection Thermal overload protector (TOP) with basic insulation with cable Axial Protection class I (with customer connection of protective earth) Motor capacitor according to EN 60252-1 in safety protection class S0 Conformity with standards EN 60034-1 (2010) Approval VDE / EAC SKU: S4E560-AQ01-01 -
AC Fan, AC Fan, Ebmpapst
S4D500-AE03-01
Moisture (F) / Environmental (H) protection class H2 Max. permitted ambient temp. for motor (transport/storage) +80 °C Min. permitted ambient temp. for motor (transport/storage) -40 °C Installation position Shaft horizontal or rotor on bottom; rotor on top on request Condensation drainage holes On rotor side Mode S1 Motor bearing Ball bearing Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA Electrical hookup Terminal box Motor protection Thermal overload protector (TOP) with basic insulation SKU: S4D500-AE03-01 -
AC Fan, AC Fan, Ebmpapst
S4D500-AM03-01
Material of terminal box ABS plastic, black
Material of blades Press-fitted sheet steel blank, sprayed with PP plastic
Material of guard grille Steel, phosphated and coated in black plastic
Motor protection Thermal overload protector (TOP) brought out
Product conforming to standard CE; EN 61800-5-1
Surface of rotor Coated in black
Number of blades 5
Type of protection IP 54
Protection class I
Approval GOST; VDESKU: S4D500-AM03-01 -
AC Fan, AC Fan, Ebmpapst
S4E500-AE03-01
Electrical leads Via terminal box, integrated capacitor
connected via terminal box
Motor protection Thermal overload protector (TOP)
brought out
Cable exit Axial
Protection class I (if protective earth is connected by
customer)
Product conforming
to standard
EN 61800-5-1; CE
Approval CSA C22.2 Nr.100; EAC; UL 1004-1;
VDESKU: S4E500-AE03-01 -
AC Fan, AC Fan, Ebmpapst
S4E500-AM03-01
Material of blades Press-fitted sheet steel blank, sprayed with PP plastic
Material of guard grille Steel, phosphated and coated in black plastic
Motor protection Thermal overload protector (TOP) brought out
Product conforming to
standard
CE; EN 61800-5-1
Surface of rotor Cast in aluminium
Number of blades 5
Type of protection IP 54
Protection class I
Max. permissible ambient
motor temp. (transp./ storage)
+ 80 °C
Min. permissible ambient
motor temp. (transp./storage)
– 40 °C
Approval CSA C22.2 Nr.100; GOST; UL 1004-1; VDESKU: S4E500-AM03-01 -
AC Fan, AC Fan, Ebmpapst
S6E400-AP10-47
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes Rotor-side
Operation mode S1
Motor bearing Ball bearing
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
< 0.75 mA
Electrical leads Via terminal box, integrated capacitor connected via terminal box
Motor protection Thermal overload protector (TOP) wired internally
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 60335-1; CESKU: S6E400-AP10-47 -
AC Fan, AC Fan, Ebmpapst
S4E400-AP02-24
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system)
< 0.75 mA
Electrical hookup Via terminal box, capacitor integrated and connected
Motor protection Thermal overload protector (TOP) internally connected
With cable Variable
Protection class I (with customer connection of protective earth)
Motor capacitor according to EN
60252-1 in safety protection class
P0/S0
Conformity with standards EN 60335-1; CESKU: S4E400-AP02-24 -
AC Fan, AC Fan, Ebmpapst
S4D400-AP12-04
Material of impeller Sheet steel, coated in black
Material of guard grille Steel, phosphated and coated in black plastic
Product conforming to
standard
EN 60335-1
Surface of rotor Coated in black
Number of blades
5
Type of protection IP 44 – depending on position
Protection class I
Max. permissible ambient
motor temp. (transp./ storage)
+ 80 °C
Min. permissible ambient
motor temp. (transp./storage)
– 40 °C
Approval CCCSKU: S4D400-AP12-04 -
AC Fan, AC Fan, Ebmpapst
S6E350-AN24-40
Electrical hookup Terminal box / Via terminal box, capacitor integrated and connected Motor protection Thermal overload protector (TOP) internally connected with cable Axial Protection class I (with customer connection of protective earth) Motor capacitor according to EN 60252-1 in safety protection class S0 Conformity with standards EN 60335-1 / CE Approval CCC / EAC SKU: S6E350-AN24-40 -
AC Fan, AC Fan, Ebmpapst
S4D350-AN08-30
Installation position Shaft horizontal or rotor on bottom; rotor
on top on request
Condensation
drainage holes
On rotor side
Mode S1
Motor bearing Ball bearing
Touch current
according to IEC
60990 (measuring
circuit Fig. 4, TN
system)
< 0.75 mA
with cable Variable
Protection class I (with customer connection of protective
earth)
Conformity with
standards
EN 60335-1, motor does not have
factory-installed overheating protection; CE
Approval EAC; CCCSKU: S4D350-AN08-30