Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
ProductsEnda
Showing 1–48 of 770 results
-
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EM4401-230
2×4 digits LCD display Easy adjustment of parameters from the keys on the front panel 9 steps (0-99.99 seconds to 0-9999 hours) time range Selecting the sensor input type (PNP, NPN) Selectable forward / reverse time counting direction Adjustable input signal pulse and gap time Working with or without memory 12 different output modes Two NO contact outputs and two NPN 50mA current limited SSR outputs SKU: EM4401-230 -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
ETM742-230VAC
Electrical Properties Connection 2.5 mm ² socketed terminal Working Temperature ° C 0 … 50 ºC Data protection EEPROM (minimum 10 Years) Power consumption 7VA Scale 9 steps (0 … 99.99 seconds to 0 … 9999 hours) time interval Supply Voltage 230Vac + 10% -20%, 50 / 60Hz Accuracy ± 0.1 ± 20mS SKU: ETM742-230VAC -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
ETM2432-230VAC
Double contact output for timing control External start, reset and gate input Hour – minute and minute – second display selection Scale 0:01 …. 99:59 minutes, 0:01 …. 99:59 hours Time increment and decrement steps can be adjusted as desired Counting down Start and stop possibility from the front panel 8 different warning tones Upper and lower limits can be adjusted to the set value. CE marked according to EN standards SKU: ETM2432-230VAC -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
ATM9321-SM-SSR
Connection 2.5mm ² socketed terminal Sensitivity 1 digit Working Temperature ° C 0 … 50 ° C Supply Voltage 9-30Vdc / 7-24Vac ± 10% SMPS module Data protection EEPROM (minimum 10 years) Scale 0 … 9.99 or 0 … 99.9 or 0 … 999 minutes (selectable) Accuracy ± 4% for anolog scale, ± 0.5% for time display (of full scale) Power consumption 6VA SKU: ATM9321-SM-SSR -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
ATM9321-230VAC-SSR
Connection 2.5mm ² socketed terminal Sensitivity 1 digit Working Temperature ° C 0 … 50 ° C Supply Voltage 230Vac + 10% -20%, 50 / 60Hz Data protection EEPROM (minimum 10 years) Scale 0 … 9.99 or 0 … 99.9 or 0 … 999 minutes (selectable) Accuracy ± 4% for anolog scale, ± 0.5% for time display (of full scale) Power consumption 6VA SKU: ATM 9321-SSR -
Enda, Temperature Sensors, Temperature Sensors
NTC-LPS-1,5S
- It is the temperature sensor to be used in cooling control devices.
- The standard cable length of the sensor with stainless steel sheath and silicon cable is 1.5m.
- If specified at the time of order, cable length can be extended.
- Steel jacket R1 / 8 with Gas thread and nut included
- Can be used with all devices in the cooling group
SKU: NTC-LPS-1,5S -
Enda, Temperature Sensors, Temperature Sensors
NTC-APP-1,5P
- It is the temperature sensor to be used in cooling control devices.
- The cable length of the sensor with PVC sheath and PVC cable is standard 1.5m.
- If specified at the time of order, cable length can be extended.
- Can be used with all devices in the cooling group
SKU: NTC-APP-1,5P -
Enda, Temperature Sensors, Temperature Sensors
NTC-APT-1,5T
- It is the temperature sensor to be used in cooling control devices.
- The cable length of the sensor with thermoplastic sheath and thermoplastic cable is standard 1.5m, it cannot be produced in different cable lengths.
- It can be used with all the devices in the cooling group.
SKU: NTC-APT-1,5T -
-
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI2041-SM
4 digits display Display scale can be adjusted between -1999 and 4000 Decimal point can be adjusted between 1. and 3. digits Measurement unit can be displayed Selectable four different standard input types (0-20mA, 4-20mA, 0-1V, 0-10V) User can calibrate the device according to specified input type Sampling time can be adjusted in four steps Stores maximum and minimum measurement values Two relay outputs for control and alarm (order option) Above and below set point value can be set Selectable independent, deviation and band alarm Sensor supply output(Optional) RS485 Modbus RTU communication protocol feature (order option) CE marked according to European Norms SKU: n/a -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI2041-230
4 digits with digital display Display scale can be adjusted between -1999 … 4000 Decimal point can be adjusted between 1. and 3. digits Measuring unit can be seen Four different selectable standard input types (0-20mA, 4-20mA, 0-1V, 0-10V) The user can calibrate the device according to the input type to be determined. Sampling time can be set in four steps Storing and keeping the maximum and minimum measurement values on the display 2 contact outputs for output and alarm control Control option above and below set point Selectable independent, deviation and band alarm Sensor supply output Communication feature with RS-485 Modbus RTU protocol CE marked according to EN standards SKU: n/a -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EMM9510
5-digit display with 3.5 inch TFT graphic display 10 adjustable address readings Updating of slave registers via master Multiple and single representation of read values Changeable baudrate CE marked according to EN standards SKU: EMM9510 -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI4430-SM-RS
4 digits LCD display Display scale can be adjusted between -1999 and 9999 Decimal point can be adjusted between 0 and 0.000 digits Selectable four different standard input types (0-20mA, 4-20mA, 2-10V, 0-10V) Adjustable input noise filtering RS485 Modbus RTU communication protocol feature (order option) CE marked according to European Norms SKU: EI4430-SM-RS -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI4430-230VAC-RS
4 digits LCD display Display scale can be adjusted between -1999 and 9999 Decimal point can be adjusted between 0 and 0.000 digits Selectable four different standard input types (0-20mA, 4-20mA, 2-10V, 0-10V) Adjustable input noise filtering RS485 Modbus RTU communication protocol feature (order option) CE marked according to European Norms SKU: EI4430-230VAC-RS -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI4430-SM
4 digits LCD display Display scale can be adjusted between -1999 and 9999 Decimal point can be adjusted between 0 and 0.000 digits Selectable four different standard input types (0-20mA, 4-20mA, 2-10V, 0-10V) Adjustable input noise filtering RS485 Modbus RTU communication protocol feature (order option) CE marked according to European Norms SKU: EI4430-SM -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EI4430-230VAC
4 digits LCD display Display scale can be adjusted between -1999 and 9999 Decimal point can be adjusted between 0 and 0.000 digits Selectable four different standard input types (0-20mA, 4-20mA, 2-10V, 0-10V) Adjustable input noise filtering RS485 Modbus RTU communication protocol feature (order option) CE marked according to European Norms SKU: EI4430-230VAC -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EC2401-230VAC
Easy to use 4 digits indicator Easy to use front panel keypad Input frequency can be selected Parameter access protection RS485 Modbus communication interface CE marked according to European Norms SKU: EC2401-230VAC -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EDT3423A-SM-R
On-Off control Three relay outputs for cooling,defrost and fan control Two NTC probe inputs for cooling and defrost control Offset value can be entered for NTC probe Compressor protection parameters can be entered SKU: EDT3423A-SM-R -
Enda, Temperature & Process Controllers, Temperature & Process Controllers
EDT3423A-230-R
On-Off control Three relay outputs for cooling,defrost and fan control Two NTC probe inputs for cooling and defrost control Offset value can be entered for NTC probe Compressor protection parameters can be entered SKU: EDT3423A-230-R -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-70
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-70 -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-50
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-50 -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-35
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-35 -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-25
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-25 -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-15
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-15 -
Enda, Temperature Sensors, Temperature Sensors
EP02-2K08-10
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-2K08-10 -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-70Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-70Ü -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-50Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-50Ü -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-35Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-35Ü -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-25Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-25Ü -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-15Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-15Ü -
Enda, Temperature Sensors, Temperature Sensors
EP02-1K08-10Ü
- 1/2″ thread straight type resistance thermometer
- Protecting tube diameter and immersion length is optional
- Three wire installation
- No inset in standard and operation up to 400 °C
- Operation at higher temperatures require inset and is order option
SKU: EP02-1K08-10Ü -
Enda, Temperature Sensors, Temperature Sensors
EP0812-5Ç
- Bayonet type resistance thermometer
- Used in easy environment in terms of working conditions
- Mounted with fixed cables and secured with spring compression to their location of installation
- Can not used for liquids or humid conditions
SKU: EP0812-5Ç -
Enda, Temperature Sensors, Temperature Sensors
EP0812-4Ç
- Bayonet type resistance thermometer
- Used in easy environment in terms of working conditions
- Mounted with fixed cables and secured with spring compression to their location of installation
- Can not used for liquids or humid conditions
SKU: EP0812-4Ç -
Enda, Temperature Sensors, Temperature Sensors
EP0812-3Ç
Bayonet type resistance thermometer
Used in easy environment in terms of working conditions
Mounted with fixed cables and secured with spring compression to their location of installation
Can not used for liquids or humid conditions
SKU: EP0812-3Ç -
Enda, Temperature Sensors, Temperature Sensors
EP0812-2Ç
- Bayonet type resistance thermometer
- Used in easy environment in terms of working conditions
- Mounted with fixed cables and secured with spring compression to their location of installation
- Can not used for liquids or humid conditions
SKU: EP0812-2Ç -
Enda, Temperature Sensors, Temperature Sensors
EP0812-1Ç
- Bayonet type resistance thermometer
- Used in easy environment in terms of working conditions
- Mounted with fixed cables and secured with spring compression to their location of installation
- Can not used for liquids or humid conditions
SKU: EP0812-1Ç -
Enda, Temperature Sensors, Temperature Sensors
EP0630-5Ç
- Bayonet type resistance thermometer
- Used in easy environment in terms of working conditions
- Mounted with fixed cables and secured with spring compression to their location of installation
- Can not used for liquids or humid conditions
SKU: EP0630-5Ç
