Mass 5.8 kg |
Size 400 mm |
Surface of rotor Coated in black |
Material of electronics housing Die-cast aluminium |
Material of blades Press-fitted sheet steel blank, sprayed with PP plastic |
Material of guard grille Steel, phosphated and coated in black plastic |
Number of blades 5 |
Direction of air flow “V” |
Direction of rotation Counter-clockwise, seen on rotor |
Type of protection IP 54 |
Insulation class “B” |
Humidity class F3-1 |
Max. permissible ambient motor |
temp. (transp./ storage) |
+80 °C |
Min. permissible ambient motor |
temp. (transp./storage) |
-40 °C |
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request |
Condensate discharge holes Rotor-side |
Operation mode S1 |
Motor bearing Ball bearing |
S3G400-LC22-51
Technical features – Output 10 VDC, max. 1.1 mA
– Alarm relay
– Motor current limit
– Soft start
– Control input 0-10 VDC / PWM
– Control interface with SELV potential safely disconnected from the mains
– Over-temperature protected electronics / motor
– Line undervoltage detection
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC harmonics Acc. to EN 61000-3-2/3
EMC interference emission Acc. to EN 61000-6-3 (household environment)
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
<= 3.5 mA
Motor protection Thermal overload protector (TOP) wired internally
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1; CE
Approval CCC; CSA C22.2 Nr.77; EAC; UL 2111
There are no reviews yet.