Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
Products
Autonics, Proximity Sensors, Proximty Sensors
PR12-4AO
- Wire type and power : AC 2-wire type
100-240VAC~ - Sensing side diameter : M12
- Sensing distance : 4mm
- Installation : Non-shield(non-flush)
- Standard sensing target : 12×12×1mm(iron)
| Manifacturer | Autonics |
| Wire type and power | AC 2-wire type |
| 100-240VAC~ | |
| Sensing side diameter | M12 |
| Sensing distance | 4mm |
| Installation | Non-shield(non-flush) |
| Standard sensing target | 12×12×1mm(iron) |
| Response frequency | 20Hz |
| Current specification | Leakage current: Max. 2.5mA |
| Control output | Normally Open |
| Material | Brass(nickel plated) |
| Cable Standard/material | Standard cable |
| Protection structure | IP67 |
| Body length | Standard type |
| Environment_Ambient temperature | -25 to 70℃, storage: -30 to 80℃ |
| Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Residual voltage | Max. 10V |
| Insulation type | Double insulation or reinforced insulation(mark: , dielectric strength between the measuring input part and the power part: 1kV) |
| Weight | Approx. 84g(approx. 66g) |
Based on 0 reviews
Be the first to review “PR12-4AO”
Related products
-
Autonics, Fiber Optic Sensors, Fiber Optic Sensors
BF4R
- Type : Standard type
- Light source : Red LED(660nm)
- Response time : Frequency 1: Max. 0.5ms
Frequency 2: Max. 0.7ms - Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by ON/OFF button)
- Control output : NPN open collector
SKU: BF4R -
Autonics, Fiber Optic Sensors, Fiber Optic Sensors
BF3RX-P
- Type : Built-in twin volume type
- Light source : Red LED(660nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by control wire)
- Control output : PNP open collector
SKU: BF3RX-P -
Autonics, Photo Electric Sensors, Photomicro Sensors
BJ100-DDT
- Sensing type : Diffuse reflective type
- Sensing distance : 100mm
- Sensing target : Opaque, Translucent material
- Light source : Infrared LED(850nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by switch)
- Control output : NPN open collector
SKU: BJ100-DDT
There are no reviews yet.