Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
Products
Autonics, Photo Electric Sensors, Photomicro Sensors
BS5-V2M
- Sensing type : Through-beam type
- Hysteresis(distance) : ≤0.05mm
- Response time : Light ON: Max. 20㎲,
Dark ON: Max. 100㎲ - Control output : NPN open collector
- Connection : Connector type
| Manifacturer | Autonics | |||
| Sensing type | Through-beam type | |||
| Sensing distance | 5mm | |||
| Sensing target | Opaque | |||
| Min. sensing target | ≥Ø0.8mm×2mm | |||
| Hysteresis(distance) | ≤0.05mm | |||
| Response time | Light ON: Max. 20㎲, | |||
| Dark ON: Max. 100㎲ | ||||
| Response frequency | 2kHz | |||
| Light source | Infrared LED | |||
| Peak emission wavelength | 940nm | |||
| Operation mode | Light ON/Dark ON(set by control wire) | |||
| Indicator | Operation indicator (red LED) | |||
| Weight | Approx. 30g | |||
| Power supply | 5-24VDC ±10%(ripple P-P : max. 10%) | |||
| Current consumption | Max. 30mA | |||
| Control output | NPN open collector | |||
| ≤30VDC | ||||
| Load current | Max. 100mA | |||
| Residual voltage | NPN: ≤1.2VDC, PNP: ≤ 1.2VDC | |||
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit | |||
Based on 0 reviews
Be the first to review “BS5-V2M”
Related products
-
Autonics, Temperature & Process Controllers, Temperature & Process Controllers
AT8N
- Operation method : Time setting
- Output Operation : POWER ON DELAY, FLICKER, INTERVAL
- Time operation : POWER ON START
- Terminal : 8-pin plug
- Power supply : 100-240VAC~, 24-240VDC
- Control output : Time-limit SPDT (1c): 2 or Instantaneous SPDT (1c): 1 + Time-limit SPDT (1c): 1 depending on output operation mode
SKU: AT8N -
-
Autonics, Temperature & Process Controllers, Temperature & Process Controllers
TCN4S-24R
- Display method : 4-digit 7-segment LED
- Control method : ON/OFF control, P, PI, PD, PID control
- Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC)
RTD: DPt100Ω, Cu50Ω - Sampling cycle : 100ms
- Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
- Power supply : 100-240VAC~ 50/60Hz
SKU: TCN4S-24R
There are no reviews yet.