, ,

BS5-T2M


  • Sensing type : Through-beam type
  • Hysteresis(distance) : ≤0.05mm
  • Response time : Light ON: Max. 20㎲,
    Dark ON: Max. 100㎲
  • Control output : NPN open collector
  • Connection : Connector type

Manifacturer Autonics
Sensing type Through-beam type
Sensing distance 5mm
Sensing target Opaque
Min. sensing target ≥Ø0.8mm×2mm
Hysteresis(distance) ≤0.05mm
Response time Light ON: Max. 20㎲,
Dark ON: Max. 100㎲
Response frequency 2kHz
Light source Infrared LED
Peak emission wavelength 940nm
Operation mode Light ON/Dark ON(set by control wire)
Indicator Operation indicator (red LED)
Weight Approx. 30g
Power supply 5-24VDC  ±10%(ripple P-P : max. 10%)
Current consumption Max. 30mA
Control output NPN open collector
Load current Max. 100mA
Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation resistance ≥20 MΩ (250 VDC megger)
Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC
Dielectric strength 1,000VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “BS5-T2M”

There are no reviews yet.