Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
Products
Autonics, Remote I/O System, Remote I/O System
ARIO-S-DO08P
- I/O common : PNP
- Output leakage voltage : Max. 1.2VDC
- I/O signal level : 24VDC±10%
| I/O common | PNP |
|---|---|
| Output leakage voltage | Max. 1.2VDC |
| I/O signal level | 24VDC±10% |
| Rated output current_4CH | Max. 500mA/CH |
| Rated output current_8CH | Max. 500mA/CH |
| On delay time | Max. 0.5ms |
| Off delay time | Max. 1.5ms |
| Power consumption_ABUS | max. 180mA (max. 0.9W) |
| Mounting type | DIN rail mounting |
| Insulation resistance | 100MΩ (at 500VDC megger) I/O to inner circuit: photocoupler insulated, between channels: non-insulated |
| Environment_Ambient temperature | -10 to 55℃, storage: -25 to 70℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP20(IEC standard) |
| Material | Terminal: polyamide6, Body: modified polyphenylene oxide, Base: polyamide6, poly oxy methylene |
| Weight | Approx. 108g (approx. 75g) |
Based on 0 reviews
Be the first to review “ARIO-S-DO08P”
Related products
-
Autonics, Fiber Optic Sensors, Fiber Optic Sensors
BF3RX-P
- Type : Built-in twin volume type
- Light source : Red LED(660nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by control wire)
- Control output : PNP open collector
SKU: BF3RX-P -
Autonics, Fiber Optic Sensors, Fiber Optic Sensors
BF4RP
- Type : Standard type
- Light source : Red LED(660nm)
- Response time : Frequency 1: Max. 0.5ms
Frequency 2: Max. 0.7ms - Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by ON/OFF button)
- Control output : PNP open collector
SKU: BF4RP -
-
Autonics, Temperature & Process Controllers, Temperature & Process Controllers
TCN4S-24R
- Display method : 4-digit 7-segment LED
- Control method : ON/OFF control, P, PI, PD, PID control
- Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC)
RTD: DPt100Ω, Cu50Ω - Sampling cycle : 100ms
- Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
- Power supply : 100-240VAC~ 50/60Hz
SKU: TCN4S-24R
There are no reviews yet.