Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
Products
Autonics, Terminal Blocks, Terminal Blocks
ABS-S04PA-CN
- Rated voltage : 24VDC ±10%
- Rated load voltage & current : 250VAC~ 3A, 30VDC 3A
- Current consumption : ≤ 8mA
- Applied relay : APAN3124 [MATSUSHITA(Panasonic)]
- Number of relay points : 4-point
- Environment_Ambient temperature : -15 to 55℃, storage: -25 to 65℃
- Material : CASE & BASE: Modified Polyphenylene Oxide, TERMINAL PIN: Brass
| Rated voltage | 24VDC ±10% |
|---|---|
| Rated load voltage & current | 250VAC~ 3A, 30VDC 3A |
| Current consumption | ≤ 8mA |
| Applied relay | APAN3124 [MATSUSHITA(Panasonic)] |
| Number of relay points | 4-point |
| Indicator | Operation indicator: Blue LED |
| Applicable cable | AWG22-16(0.30 to 1.25mm²) |
| Insulation resistance | ≥1,000MΩ (at 500VDC megger) |
| Dielectric strength_Between coil-contacts | 3,000VAC 50/60Hz for 1 minute |
| Dielectric strength_Between same contacts | 1,000VAC 50/60Hz for 1 minute |
| Environment_Ambient temperature | -15 to 55℃, storage: -25 to 65℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Material | CASE & BASE: Modified Polyphenylene Oxide, TERMINAL PIN: Brass |
| Accessories | Jumper bar: 2(Model:JB-7.62-04) |
| Weight | Approx. 104g(approx. 68g) |
Based on 0 reviews
Be the first to review “ABS-S04PA-CN”
Related products
-
Autonics, Temperature & Process Controllers, Temperature & Process Controllers
CT6S-1P4
- Display method : 6-digit 7-segment LED
- Operation method : Counter: Count up, Count down, Count up/down
Timer: Count up, Count down - Terminal : Terminal block
- Output Operation : SIGNAL ON DELAY, POWER ON DELAY, FLICKER, INTERVAL, SIGNAL OFF DELAY, ON-OFF DELAY, INTEGRATION TIME
- Power supply : 100-240VAC~ 50/60Hz
- Protection structure : IP65(front panel)
SKU: CT6S+1P4 -
Autonics, Fiber Optic Sensors, Fiber Optic Sensors
BF4R
- Type : Standard type
- Light source : Red LED(660nm)
- Response time : Frequency 1: Max. 0.5ms
Frequency 2: Max. 0.7ms - Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by ON/OFF button)
- Control output : NPN open collector
SKU: BF4R -
Autonics, Encoder, Encoder
E50S8-100-3-T-1
- Shaft outer diameter : Ø8mm
- Max. response frequency : 300kHz
- Max. allowable revolution : 5000rpm
- Starting torque : Max. 70gf.cm(max. 0.00686N.m)
- Resolution : 100PPR
- Control output : Totem pole
- Power supply : 5-24VDC
- Connection type : Axial cable type
- Protection structure : IP50
SKU: E50S8-100-3-T-1 -
There are no reviews yet.