PM-F45 PM-F45 - Product Number: PM-F45, Products Name: Amplifier Built-in / U-shaped Micro Photoelectric Sensor
Part Number

PM-F45
Product Number

PM-F45
Products Name

Amplifier Built-in / U-shaped Micro Photoelectric Sensor
Product details

Compact / Cable type [F type]
Applicable regulations and certifications

CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL Recognition certification(Note) : Conformed from December 20
Sensing range

6 mm 0.236 in (fixed)
Minimum sensing object

0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis

0.05 mm 0.002 in or less
Supply voltage

5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption

15 mA or less
Output

NPN open-collector transistor・Maximum sink current: 50 mA・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink c
Output:Output operation

Incorporated with 2 outputs: Light-ON / Dark-ON
Output:Short-circuit protection

Incorporated
Response time

Under light received condition: 20 μs or lessUnder light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) : Refer to the note on the specification page for the res
Operation indicator

Orange LED (lights up under light received condition)
Pollution degree

3
Protection

IP64 (IEC)
Ambient temperature

-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉
Ambient humidity

5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance

Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability

1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance

20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance

10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance

15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element

Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material

Enclosure: PBTDisplay section: Polycarbonate
Cable

0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long
Wiring length

Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable
Weight

Net weight: 10 g approx.Gross weight: 15 g approx.
Remark

Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Panasonic PM-F45

SKU: PM-F45
48 adet stokta

USD$50.00

Amplifier Built-in / U-shaped Micro Photoelectric Sensor

Order on WhatsApp
48 adet stokta

Did you like this product? Add to favorites now and follow the product.

Add to wishlist
Rekabetçi Fiyatlar

Şeffaf ve güncel fiyatlandırma

Doğru Ürün Garantisi

Ürün koduna uygun, birebir parça

Uzman Teknik Ekip

Deneyimli otomasyon ekibi

Kolay İade Süreci

Net iade ve değişim koşulları

Category:
Marka:

Teknik Özellikler

Part NumberPM-F45
Product NumberPM-F45
Products NameAmplifier Built-in / U-shaped Micro Photoelectric Sensor
Product detailsCompact / Cable type [F type]
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL Recognition certification(Note) : Conformed from December 20
Sensing range6 mm 0.236 in (fixed)
Minimum sensing object0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis0.05 mm 0.002 in or less
Supply voltage5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption15 mA or less
OutputNPN open-collector transistor・Maximum sink current: 50 mA・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink c
Output:Output operationIncorporated with 2 outputs: Light-ON / Dark-ON
Output:Short-circuit protectionIncorporated
Response timeUnder light received condition: 20 μs or lessUnder light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) : Refer to the note on the specification page for the res
Operation indicatorOrange LED (lights up under light received condition)
Pollution degree3
ProtectionIP64 (IEC)
Ambient temperature-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉
Ambient humidity5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminanceFluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
MaterialEnclosure: PBTDisplay section: Polycarbonate
Cable0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long
Wiring lengthExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable
WeightNet weight: 10 g approx.Gross weight: 15 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.