FX-551-C2 FX-551-C2 - Product Number: FX-551-C2, Products Name: Digital Fiber Sensor
Part Number

FX-551-C2
Product Number

FX-551-C2
Products Name

Digital Fiber Sensor
Product details

Amplifiers Cable type
Supply voltage

12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Power consumption

Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Output

NPN open-collector transistor・Maximum sink current : 100 mA・Applied voltage : 30 V DC or less (between output and 0 V)・Residual voltage : 2 V or less (at maximum sink current)
Output:Output operation

Switchable either Light-ON or Dark-ON by L/D mode
Output:Short-circuit protection

Incorporated
Response time

FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
Sensitivity setting

2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity setting

Incorporated, 4 steps
Incident light intensity display range

FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Timer function

Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer function:Timer period

Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.(Note): When set to LONG, U-L
Protection

IP40(IEC)
Ambient temperature

-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 unitsare mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing all
Vibration resistance

10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance

98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated)

Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Material

Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
Cable

0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension

Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Weight

Net weight : 55 g approx., Gross weight : 90 g approx.
Remark

Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Panasonic FX-551-C2

SKU: FX-551-C2
32 adet stokta

USD$185.00

Digital Fiber Sensor

Order on WhatsApp
32 adet stokta

Did you like this product? Add to favorites now and follow the product.

Add to wishlist
Rekabetçi Fiyatlar

Şeffaf ve güncel fiyatlandırma

Doğru Ürün Garantisi

Ürün koduna uygun, birebir parça

Uzman Teknik Ekip

Deneyimli otomasyon ekibi

Kolay İade Süreci

Net iade ve değişim koşulları

Category:
Marka:

Teknik Özellikler

Part NumberFX-551-C2
Product NumberFX-551-C2
Products NameDigital Fiber Sensor
Product detailsAmplifiers Cable type
Supply voltage12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Power consumptionNormal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
OutputNPN open-collector transistor・Maximum sink current : 100 mA・Applied voltage : 30 V DC or less (between output and 0 V)・Residual voltage : 2 V or less (at maximum sink current)
Output:Output operationSwitchable either Light-ON or Dark-ON by L/D mode
Output:Short-circuit protectionIncorporated
Response timeFAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
Sensitivity setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity settingIncorporated, 4 steps
Incident light intensity display rangeFAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Timer functionIncorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer function:Timer periodTimer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.(Note): When set to LONG, U-L
ProtectionIP40(IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 unitsare mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing all
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated)Red LED (Peak emission wavelength : 660 nm 0.026 mil)
MaterialEnclosure, Case cover : Polycarbonate, Switch : Polyacetal
Cable0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
WeightNet weight : 55 g approx., Gross weight : 90 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.